Publications

LIST

Year 2021

  1. Y. Shimada, K. Harada, Y. Mine, M. Yoshimura, K
    Low-temperature micro-fracture toughness testing of grain boundaries in steel
    Materials Transactions 62 (2021), In press.
  2. A. Matsushita, S. Ueki, Y. Mine, K. Takashima
    Comparative study of microstructure-sensitive fatigue crack propagation in coarse- and fine-grained microstructures between stable and metastable austenitic stainless steels using miniature specimen
    ISIJ International 61 (2021), In press.

PageTop

Year 2020

  1. J. Wu, S. Si, K. Takagi, T. Li, Y. Mine, K. Takashima, Y.L. Chiu
    Study of basal and pyramidal slips in Mg-Y alloys using micro-pillar compression
    Philosophical Magazine 100 (2020) 1454–1475.
  2. S. Ueki, R. Oura, Y. Mine, K. Takashima
    Micro-mechanical characterisation of hydrogen embrittlement in nano-twinned metastable austenitic stainless steel
    International Journal of Hydrogen Energy 45 (2020) 27950–27957.
  3. S. Ueki, Y. Mine, K. Takashima
    Excellent mechanical properties of taenite in meteoric iron
    Scientific Reports 11 (2021) 4750.

PageTop

Year 2019

  1. S. Ueki, K. Koga, Y. Mine, K. Takashima
    Crystallographic Characterisation of Hydrogen-induced Twin Boundary Separation in Type 304 Stainless Steel Using Micro-tensile Testing
    ISIJ International 59 (2019) 927-934.
  2. Y. Mine, S. Katashima, R. Ding, P. Bowen, K. Takashima
    Fatigue crack growth behaviour in single-colony lamellar structure of Ti–6Al–4V
    Scripta Materialia 165 (2019) 107-111.
  3. K. Takagi, T. Mayama, Y. Mine, Y.L. Chiu, K. Takashima
    Extended ductility due to kink band formation and growth under tensile loading in single crystals of Mg-Zn-Y alloy with 18R-LPSO structure
    Journal of Alloys and Compounds 806 (2019) 1384-1393.
  4. S. Ueki, T. Matsumura, Y. Mine, S. Morito, K. Takashima
    Microstructural fatigue crack growth in single-packet structures of ultra-low carbon steel lath martensite
    Scripta Materialia 173 (2019) 80-85.
  5. Y. Mine, Y. Matsuzaki, K. Takashima
    Anisotropy of strength and plasticity in single-colony lamellar structure of Ti‒6Al‒4V alloy
    Scripta Materialia 177 (2020) 223-228.
  6. K. Takagi, M. Yamasaki, Y. Mine, K. Takashima
    Temperature dependence of prismatic slip in a single-crystalline long-period stacking ordered Mg-Zn-Y alloy
    Scripta Materialia 178 (2020) 498-502.
  7. S. Ueki, Y. Mine, K. Takashima
    Microstructure-sensitive fatigue crack growth in lath martensite of low carbon steel
    Materials Science and Engineering: A 773 (2020) 138830

PageTop

Year 2018

  1. W.S. Chuang, J.C. Huang, P.H. Lin, C.H. Hsieh, Y.H. Lin, K. Takagi, Y. Mine, K. Takashima
    Deformation mechanisms and mechanical properties of (0001) Mg-Zn-Y 18R-LPSO single crystals
    Journal of Alloys and Compounds 772 (2019) 288-297.

PageTop

Year 2017

  1. Y. Mine, N. Horita, Z. Horita, K. Takashima
    Effect of ultrafine grain refinement on hydrogen embrittlement of metastable austenitic stainless steel
    Int. J. Hydrogen Energy 42 (2017) 15415-15425.
  2. T. Schwark, M. Müller, Y. Mine, O. Kraft, R. Schwaiger
    Preparing soft magnetic composites for structural and micromechanical investigations
    Practical Metallography 54 (2017) 366-387.
  3. Y. Mine, R. Maezono, T. Mayama, J. Wu, Y.L. Chiu, P. Bowen, K. Takashima
    Plasticity and crack extension in single-crystaline long pireod stacking ordered structures of Mg85Zn6Y9 alloy under micro-bending
    J. Alloys Compd. 718 (2017) 433-442.
  4. W.S. Chuang, C.H. Hsieh, P.H. Lin, J.C. Huang, K. Takagi, Y. Mine, K. Takashima
    Relation between sample size and deformation mechanism in Mg-Zn-Y 18R-LPSO single crystals
    Intermetallics 91 (2017) 110-119.
  5. D. Kishi, T. Mayama, Y. Mine, K. Takashima
    Crystallographic study of plasticity and grain boundary separation in FeCo alloy using small single- and bi-crystalline specimens
    Scr. Mater. 142 (2018) 1-5.
  6. S. Ueki, Y. Mine, K. Takashima
    Crystallographic study of hydrogen-induced twin boundary separation in type 304 stainless steel under cyclic loading
    Corros. Sci. 129 (2017) 205-213.
  7. Y. Htwe, K. Kwak, D. Kishi, Y. Mine, R. Ding, P. Bowen, K. Takashima
    Anisotropy of <a> slip behaviour in single-colony lamellar structures of Ti-6Al-4V
    Mater. Sci. Eng. A 715 (2018) 315-319.
  8. S. Hosokawa, K. Kimura, J.R. Stellhorn, K. Yoshida, K. Hagihara, H. Izuno, M. Yamasaki, Y. Kawamura, Y. Mine, K. Takashima, H. Uchiyama, S. Tsutsui, A. Koura, F. Shimojo
    Phonon excitations in a single crystal Mg85Zn6Y9 with a synchronized long-period stacking ordered phase
    Acta Mater. 146 (2018) 273-279.

PageTop

Year 2016

  1. Y. Mine, K. Koga, K. Takashima, Z. Horita
    Mechanical characterisation of microstructural evolution in 304 stainless steel subjected to high-pressure torsion with and without hydrogen pre-charging
    Mater. Sci. Eng. A 661 (2016) 87-95.
  2. Y. Mine, D. Haraguchi, T. Ideguchi, N. Horita, Z. Horita, Kazuki Takashima
    Hydrogen embrittlement of ultrafine-grained stainless steels with different stabilities of the austenitic phase
    ISIJ Int. 56 (2016) 1083-1090.
  3. T. Ito, Y. Mine, M. Otsu, K. Takashima
    Strain measurement of micrometre-sized structures under tensile loading by using scanning white-light interferometry
    Mater. Trans. 57 (2016) 1252-1256.
  4. M. Tokuda, T. Mashimo, J.I. Khandaker, Y. Ogata, Y. Mine, S. Hayami, A. Yoshiasa
    Effect of strong gravitational field on oriented crystalline perovskite-type manganese oxide La1-xSrxMnO3
    J. Mater. Sci. 51 (2016) 7899-7906.
  5. K. Kwak, T. Mayama, Y. Mine, K. Takashima
    Anisotropy of strength and plasticity in lath martensite steel
    Mater. Sci. Eng. A 674 (2016) 104-116.
  6. Y. Mine, S. Nakamichi, K. Koga, K. Takashima, O. Kraft
    Deformation behaviour of nano-twinned single crystals of an Fe-19Cr-16Ni austenitic alloy
    Mater. Sci. Eng. A 675 (2016) 181-191.
  7. T. Yokoi, H. Shuto, K. Ikeda, N. Nakada, T. Tsuchiyama, T. Ohmura, Y. Mine, K. Takashima
    Quantification of large deformation with punching in dual phase steel and change of its microstructure-Part I: Proposal of the quantification technique of the punching damage of the dual phase steel
    ISIJ Int. 56 (2016) 2068-2076.
  8. S. Ogata, Y. Mine, K. Takashima, T. Ohmura, H. Shuto, T. Yokoi
    Quantification of large deformation with punching in dual phase steel and change of its microstructure-Part III: Micro-tensile behavior of pre-strained dual-phase steel
    ISIJ Int. 56 (2016) 2084-2092.
  9. K. Kwak, T. Mayama, Y. Mine, K. Takashima
    Micro-tensile behaviour of low-alloy steel with bainite/martensite microstructure
    ISIJ Int. 56 (2016), 2313-2319.
  10. S. Ogata, T. Mayama, Y. Mine, K. Takashima
    Effect of microstructural evolution on deformation behaviour of pre-strained dual-phase steel
    Mater. Sci. Eng. A 689 (2017) 353-365.

PageTop

Year 2015

  1. Y. Mine, R. Maezono, H. Oda, M. Yamasaki, Y. Kawamura, K. Takashima
    Deformation behavior of long-period stacking ordered structured single crystals in Mg85Zn6Y9 Alloy
    Mater. Trans. 56 (2015) 952-956.
  2. Y. Mine, D. Haraguchi, Z. Horita, K. Takashima
    High-pressure torsion of metastable austenitic stainless steel at moderate temperatures
    Phil. Mag. Lett. 95 (2015) 269-276.
  3. Y. Mine, K. Koga, O. Kraft, K. Takashima
    Mechanical characterisation of hydrogen-induced quasi-cleavage in a metastable austenitic steel using micro-tensile testing
    Scr. Mater. 113 (2016) 176-179.
  4. M. Matsuda, F. Tanaka, S. Tsurekawa, K. Takashima, M. Mitsuhara, M. Nishida
    Novel Long-period Stacking-ordered Structure of Martensite in Zirconium-Palladium Alloys
    Philosophical Magazine Letters, 95(2015), 21-29.
  5. M. Matsuda, S. Nishimura, S. Tsurekawa, K. Takashima, M. Mitsuhara, M. Nishida
    Crystallography and Morphology of Antiphase Boundary-like Structure Induced by Martensitic Transformation in Ti-Pd-Fe Alloy
    Journal Alloys and Compounds, 618(2015), 527-532.

PageTop

Year 2014

  1. Y. Mine, H. Takashima, M. Matsuda, K. Takashima
    Microtension behaviour of lenticular martensite structure of Fe-30 mass% Ni alloy
    Mater. Sci. Eng. A, 618 (2014) 359-367.
  2. M. Matsuda, R. Yamashita, S. Tsurekawa, K. Takashima, M. Mitsuhara, M. Nishida
    Antiphase Boundary-like Structure of B19' Martensite via R-phase Transformation in Ti-Ni-Fe alloy
    Journal of Alloys and Compounds, 586(2014), 87-93.
  3. M. Matsuda, K. Yamashita, S. Tsurekawa, K. Takashima, M. Nishida
    Ductility Enhancement in Co-Fe-Ni Alloys by Microstructural Control
    Intermetallics, 52(2014), 124-130.

PageTop

Year 2013

  1. Y. Mine, H. Yoshimura, M. Matsuda, K. Takashima, Y. Kawamura
    Microfracture behaviour of extruded Mg-Zn-Y alloys containing long-period stacking ordered structure at room and elevated temperatures
    Mater. Sci. Eng. A 570 (2013) 63-69.
  2. M. Matsuda, Y. Iwamoto, Y. Morizono, S. Tsurekawa, K. Takashima, M. Nishida
    Enhancement of Ductility in B2-type Zr-Co-Ni Alloys with Deformation-induced Martensite and Microcrack Formation
    Intermetallics, 36(2013), 45-50.

PageTop

Year 2012

  1. Y. Mine, K. Takashima, P. Bowen
    Effect of Lamellar Spacing on Fatigue Crack Growth Behaviour of a TiAl-Based Aluminide with Lamellar Microstructure
    Mater. Sci. Eng. A 532 (2012) 13-20.
  2. Y. Mine, K. Takashima
    Crystallographic Study of Fatigue Crack Growth in Fe-Si Alloy Single Crystals
    Mater. Sci. Eng. A 534 (2012) 260-267.
  3. Y. Mine, Z. Horita
    Hydrogen Effects on Ultrafine-Grained Steels Processed by High-Pressure Torsion
    Mater. Trans. 53 (2012) 773-785.
  4. Y. Mine, A. Orita, K. Murakami, J.-M. Olive
    Fatigue Crack Growth in Type 316L Stainless Steel Subjected to Superficial and Entire Hydrogenation
    Mater. Sci. Eng. A 548 (2012) 118-125.
  5. M. Matsuda, Y. Yasumoto, K. Hashimoto, T. Hara, M. Nishida
    Transmission Electron Microscopy of Twins in 10M Martensite in Ni-Mn-Ga Ferromagnetic Shape Memory Alloy
    Materials Transactions, 53(2012), 902-906.
  6. V. M. Shyvaniuk, Y. Mine, S. M. Teus
    Phase transformation and grain refinement in hydrogenated metastable austenitic steel
    Scr. Mater. 67 (2012) 979-982.
  7. Y. Mine, K. Hirashita, H. Takashima, M. Matsuda, K. Takashima
    Micro-tension behaviour of lath martensite structures of carbon steel
    Mater. Sci. Eng. A 560 (2013) 535-544.
  8. M. Matsuda, K. Yamashita, R. Sago, K. Akamine, K. Takashima, M. Nishida
    Development of Ductile B2-Type Fe-Co Based Alloys
    Materials Transactions, 53(2012), 1826-1828.

PageTop

Year 2011

  1. Y. Mine, K. Hirashita, M. Matsuda, K. Takashima
    Martensite Formation in Hydrogen-Containing Metastable Austenitic Stainless Steel during Micro-Tension Testing
    Metallurgical & Materials Transactions A, 42(2011), 3567-3571.
  2. M. Matsuda, S. Yano, M. Nishida
    Morphology and Crystallography of Martensite Plate with Long Period Stacking Structure in Ti-Pd Shape Memory Alloy
    Materials Transactions, 52(2011), 2016-2021.
  3. M. Matsuda, K. Kuramoto, Y. Morizono, S. Tsurekawa, E. Okunishi, T. Hara, M. Nishida
    Transmission Electron Microscopy of Antiphase Boundary-Like Structure of B19' Martensite in Ti-Ni Shape Memory Alloy
    Acta Materialia, 59(2011), 133-140.
  4. M. Matsuda, T. Nishimoto, Y. Morizono, S. Tsurekawa, M. Nishida
    Enhancement of Ductility in B2-Type Zr-Co-Pd Alloys with Martensitic Transformation
    Intermetallics, 19(2011), 894-899.
  5. M. Matsuda, T. Nishimoto, K. Matsunaga, Y. Morizono, S. Tsurekawa, M. Nishida
    Deformation Structure in Ductile B2-Type Zr-Co-Ni Alloys with Martensitic Transformation
    Journal of Materials Science, 46(2011), 4221-4227.
  6. Y. Morizono, T. Fukuyama, M. Matsuda, S. Tsurekawa
    Solid- and Liquid-Solid Reactions in Aluminum-Coated Titanium Substrate Fabricated by Using Explosive Energy
    Materials Transactions, 52(2011), 2178-2183.
  7. K. Ishikawa, Y. Seki, K. Kita, M. Matsuda, M. Nishida, K. Aoki
    Hydrogen Permiation in Rapidly Quenched Amorphous and Crystallized Nb20Ti40Ni40 Alloy Ribbons
    International Journal of Hydrogen Energy, 36(2011), 1784-1792.
  8. Y. Mine, K. Hirashita, M. Matsuda, M. Otsu, K. Takashima
    Effect of Hydrogen on Tensile Behaviour of Micrometre-Sized Specimen Fabricated from a Metastable Austenitic Stainless Steel
    Corrosion Science, 53(2011), 529-533.
  9. M. Otsu, Y. Ide, M. Matsuda, K. Takashima
    Effect of Forming Conditions on Crystallization in Laser Forming of Palladium Based Thin Film Metallic Glass
    Journal of Solid Mechanics Materials Engineering, 5(2011), 929-937.
  10. Y. Mine, H. Fujisaki, M. Matsuda, M. Takeyama, K. Takashima
    Micro-Tension Behaviour of TiAl Polysynthetically-Twinned Crystals with 0°- and 90°-Oriented Lamellae
    Scr. Mater. 65(2011), 707-710.
  11. Y. Mine, S. Ando, K. Takashima
    Crystallographic Fatigue Crack Growth in Titanium Single Crystals
    Mater. Sci. Eng. A 528 (2011) 7570-7578.

PageTop

Year 2010

  1. Kwangsik Kwak, Masaaki Otsu, Kazuki Takashima
    Resonant Bending Fatigue Tests on Thin Films
    Sensors and Materials, 22-1(2010), 51-59.
  2. Masaaki Otsu, Hiroki Matsuo, Mitsuhiro Matsuda, Kazuki Takashima
    Friction stir incremental forming of aluminum alloy sheets
    Steel Research International, 81-9(2010), 942-945.

PageTop

Year 2009

  1. M. Nishida, M. Matsuda, Y. Shimada, K. Takashima, K. Ishikawa, K. Aoki
    Microstructural and Mechanical Characterizations of Rapidly Solidified Nb-TiNi Hydrogen Permeation Alloy
    J. Physics: Conference Series, 144(2009), 012106.
  2. Masaaki Otsu, Yuki Ide, Junpei Sakurai, Seiichi Hata, Kazuki Takashima
    Laser Forming of Thin Film Metallic Glass
    Journal of Solid Mechanics and Materials Engineering, 3-2(2009), 387-396.
  3. Jumpei Oka, Masaaki Otsu, Kazuki Takashima
    Laser Forming of Single Crystalline Silicon Foils
    Journal of Solid Mechanics and Materials Engineering, 3-4(2009), 679-690.
  4. Masaaki Otsu, Akira Ishii, Kazuki Takashima
    Laser Forming of Tailored Blanks of High Tensile Strength Steels
    Journal of Solid Mechanics and Materials Engineering, 3-12(2009),1312-1321.

PageTop

Year 2008

  1. Masaaki Otsu, Yusuke Kai, Kazuki Takashima
    Simultaneous Control of Shape and Properties of AZ31 Magnesium Alloy Sheets by Incremental Forming
    Materials Transactions, 49-5(2008), 1124-1128.

PageTop

Year 2007

  1. Yuji Kawakami, Fujio Tamai, Takashi Enjoji, Kazuki Takashima, Masaaki Otsu
    Preparation of Tungsten Carbide / Stainless Steel Functionally Graded Materials by Pulsed Current Sintering
    Solid State Phenomena, 127(2007), 179-184.
  2. Hideshi Miura, Hiroyuki Maeda, Makoto Uemura, Teruie Takemasu, Masaaki Otsu
    Establishment of Laser Sintering Technique for Titanium Powder
    Materials Science Forum, 534-536(2007), 465-468.
  3. Yuji Kawakami, Fujio Tamai, Takashi Enjoji, Noboru Shikatani, Tatsuya Misawa, Masaaki Otsu, Kazuki Takashima
    In Situ Obserbations of Sintering Process during Pulsed Current Sintering of Al2O3
    ZnO and WC ALLOY, Materials Science Forum, 534-536(2007), 541-544.
  4. Yuji Kawakami, Fujio Tamai, Takashi Enjoji, Kazuki Takashima, Masaaki Otsu
    Wear Resistance Properties of Tungsten Carbide/ Stainless Steel Composite Materials Prepared by Pulsed Current Sintering
    Materials Science Forum, 534-536(2007), 1573-1576.
  5. Masaaki Otsu, Yasuhiro Ito, Akira Ishii, Hideshi Miura, Kazuki Takashima
    Effect of Heat Treatment and Transformation on Bending Angle in Laser Forming of Titanium Foils
    Key Engineering Materials, 344(2007), 243-250.
  6. Masaaki Otsu, Hiroshi Taniguchi, Kazuki Takashima
    Micro-Incremental Forming of Ti and Au Foils by Indentation Method
    Key Engineering Materials, 345-346(2007), 1101-1104.
  7. Eiji Taki, Yuji Kawakami, Masaaki Otsu, Kazuki Takashima
    Fracture Behavior of Micro-Sized Fe-3%Si Alloy Single Crystals
    Journal of Solid Mechanics and Materials Engineering, 1-6(2007), 779-786.
  8. R. Tarumi, A. Shibata, H. Ogi, M. Hirao, K. Takashima and Y. Higo
    Elastic Anisotropy of an Fe79Si12B9 Amorphous Alloy Thin Film Studied by Ultrasound Spectroscopy
    Journal of Applied Physics, 101(2007), 053519.

PageTop

Year 2006

Year 2005

  1. Z. P. Zhang, K. Takashima and Y. Higo
    Size effects on deformation and fatigue behavior of a micron-sized stainless steel
    Acta Metallurgica Sincia, vol. 41, no. 4, pp. 337-341, (2005)
  2. T. P. Halford, K. Takashima, Y. Higo and P. Bowen
    Fracture tests of microsized TiAl specimens
    Fatigue & Fracture of Engineering Materials & Structures, vol. 28, No. 8, pp. 695-701 (2005)
  3. K. Takashima and Y. Higo
    Fatigue and fracture of a Ni-P amorphous alloy thin film on the micrometer scale,
    Fatigue & Fracture of Engineering Materials & Structures, vol. 28, no. 8, pp. 703-710 (2005)
  4. M. Hopcroft, T. Kramer, G. Kim, K. Takashima, Y. Higo, D. Moore and J. Brugger
    Micromechanical testing of SU-8 cantilevers
    Fatigue & Fracture of Engineering Materials & Structures, vol.28, No. 8, pp. 735-742 (2005)
  5. Y-H. Lee, K. Takashima, Y. Higo and D. Kwon
    Assessment of Indentation Fracture Toughness Based on a Direct Measurement of Crack-Driving Residual Stress
    Key Engineering Materials, vol. 297-300, pp. 286-291 (2005)
  6. S. Koyama, K. Takashima and Y. Higo
    Fracture Toughness Measurement of a Micro-Sized Single Crystal Silicon
    Key Engineering Materials, vol. 297-300, pp. 292-298 (2005)
  7. T.P. Halford, D. Rudinal, Kazuki Takashima, Yakichi Higo
    The Effect of Sample Preparation upon the Fracture Toughness of Microsized TiAl
    Key Engineering Materials, vol. 297-300, pp. 2416-2422 (2005)
  8. Y. Higo and K. Takashima
    Mechanical Properties of Microscale Materials for MEMS Applications
    Abstract for TMS 134th Annual Meeting & Exhibition, p.193, (2005)
  9. Y. Higo, T. P. Halford and K. Takashima
    Mechanical Properties Measurement of Microscale Materials for MEMS Applications
    Proc. 11th International Conference on Fracture (CD-ROM), (2005)
  10. K. Takashima, T. P. Halford, D. Rudinal, Y. Higo and M. Takeyama
    Micro Fracture Toghness Testing of TiAl Based Alloys with a Fully Lamellar Structur
    MRS Symp. Proceedings, Volume 842, pp.175-180, (2005)
  11. T. P. Halford, K. Takashima and Y. Higo
    Fatigue Testing of Microsized samples of -TiAl based material
    MRS Symp. Proceedings, Volume 842, pp.229-234, (2005)
  12. K. Takashima, T. P. Halford and Y. Higo
    Fracture and Fatigue Testing of Micro-Sized Materials for MEMS Applications
    Proc. ASME InterPACK'05, IPACK2005-73038(CD-ROM), (2005)
  13. K. Takashima and Y, Higo
    Mechanical Characterization of Microscale Materials and Components in MEMS Devices
    Future Integrated Systems - a five-year view in 2005, ed. By S. Oda and D. F. Moore, pp. 50-51, (2005)

PageTop

Before year 2004

  1. T. Kamikawa, R. Tarumi, K. Takashima and Y. Higo
    Formation of Self-Oriented Nanocrystals in an Amorphous Alloy under Focused-Ion-Beam Irradiation
    Trans. Mat. Res. Soc. Japan, vol.29, no.7, pp.3095-3097, (2004)
  2. Y-H. Lee, K. Takashima, Y. Higo and D. Kwon
    Prediction of Stress Directionality from Pile-up Morphology around Remnant Indentation
    Scripta Mater., vol.51, no.9, pp.887-891, (2004)
  3. H. Ogi, S. Kai, H. Ledbetter, R. Tarumi, M. Hirao, and K. Takashima
    Titanium's High-Temperature Elastic Constants through the hcp-bcc Phase Transformation
    Acta Mater., vol.52, no.7, pp.2075-2080, (2004)
  4. Y-H Lee, K. Takashima and D. Kwon
    Micromechanical Analysis on Residual Stress-Induced Nanoindentation Depth Shifts in DLC Films
    Scripta Mater., vol.50, no.9, pp.1193-1198, (2004)
  5. M.Otsu,D.Hayashida,K.Osakada,S.Hanami
    Combinedforward-backwardextrusionofgearwithreverseextrusion
    Proc.3rdJSTPISPF,(2004),119-122.
  6. R. Tarumi, K. Takashima and Y. Higo
    Crystallographic Features of Oriented Nanocrystals Induced by Focused-Ion-Beam Irradiation for an Amorphous Alloy
    J. Appl. Phys., vol.94, no.9, pp.6108-6115, (2003)
  7. T. Inamura, K. Takashima and Y. Higo
    Formation of Pitch-Related B.C.C Crystal at an Intersection of <112>{111} Shears in a F.C.C. Crystal
    Trans. Mat. Res. Soc. Japan, vol.28, no.3, pp.759-762, (2003)
  8. K. Yamada, S. Watanabe, K. Takashima and Y. Higo
    Nanocrystallization of Surface Layer in a 316 Austenitic Stainless Steel by Ultrasonic Shot Peening
    Trans. Mat. Res. Soc. Japan, vol.28, no.3, pp.755-758, (2003)
  9. R. Tarumi, T. Kamikawa, K. Takashima and Y. Higo
    Formation of Oriented Nano-Sized Crystals in an Amorphous Alloy under Focused Ion Beam Irradiation
    Trans. Mat. Res. Soc. Japan, vol.28, no.3, pp.751-754, (2003)
  10. T. Kamikawa, R. Tarumi, K. Takashima and Y. Higo
    Orientation Control of Nanocrystals in an Amorphous Alloy by Ion Beam Irradiation
    Trans. Mat. Res. Soc. Japan, vol.28, no.3, pp.747-750, (2003)
  11. S. Koyama, K. Nakai, K. Takashima and Y. Higo
    Fracture Toughness Tests of Thin Films for MEMS Applications
    Trans. Mat. Res. Soc. Japan, vol.28, no.3, pp.695-698, (2003)
  12. X. Li, B. Bhushan, K. Takashima, C-W. Baek and Y-K. Kim
    Mechanical Characterization of Micro/Nano Scale structures for MAMS/NEMS Applications using Nanoindentation Technique
    Ultramicroscopy, vol.97, issues 1-4, pp.481-494, (2003)
  13. T. Inamura, K. Takashima and Y. Higo
    Crystallography of Nanometre-Sized α'-Martensite Formed at Intersections of Mechanical γ-Twins in an Austenitic Stainless Steel
    Phil. Mag., vol.83, no.8, pp.935-954, (2003)
  14. H. Ogi, S. Kai, T. Ichitsubo, M. Hirao and K. Takashima
    Elastic-Stiffness Coefficient of a Silicon Carbide Fibre at Elevated Temperatures: Acoustic Spectroscopy and Micromechanics Modeling
    Phil. Mag., vol.83, no.4, pp.503-512, (2003)
  15. G. P. Zhang, K. Takashima, M. Shimojo and Y. Higo
    Fatigue Behavior of Microsized Austenitic Stainless Steel Specimens
    Mat. Lett., vol. 57, no. 9-10, pp.1555-1560, (2003)
  16. M.Shiomi,D.Takano,K.OsakadaandM.Otsu
    Formingofaluminiumalloyattemperaturesjustbelowmeltingpoint
    Int.J.MachineTools&Manufacture,43-3(2003),229-235.
  17. M.Otsu,H.Miura,M.Matsushima,K.Osakada
    Three-dimensionallaserformingofsheetmetalusingtriangularpatches
    Trans.NAMRI/SME,31(2003),87-94.
  18. M.Otsu,C.Yamagata,K.Osakada
    ReductionofBlankingNoisebyControllingPressMotion
    AnnalsoftheCIRP,52-1(2003),245-248.
  19. M.Otsu,D.Hayashida,K.Osakada,S.Hanami
    CombinedForward-backwardExtrusionwithReverseRamMotion-ApplicationtoForgingofGear-
    Proc.ASPF2003,(2003),158-161.
  20. S.Hanami,R.Matsumoto,M.Otsu,K.OsakadaandD.Hayashida
    CombinedForward-backwardExtrusionwithControlledReversalRamMotion-EffectofReversalRamMotion-
    Proc.ASPF2003,(2003),162-166.
  21. M.MatsudaandH.Miura
    "TheEffectofMoontheMezzo-HeterogeneousMicrostructureandtheMechanicalPropertiesforSinteredAlloySteelsbyMIMprocess"
    Metals&MaterialsInternational,Vol.8 (inprinting)(2003)
  22. R. Tarumi, K. Takashima and Y. Higo
    Formation of Oriented Nanocrystals in an Amorphous Alloy by Focused-Ion-Beam Irradiation
    Applied Physics Letters, vol.81, no.24, pp.4610-4612, (2002)
  23. H. Ogi, G. Shimoike, K. Takashima and M. Hirao
    Measurement of Elastic Tensor of an Anisotropic Thin Film by Electromagnetic Acoustic Resonance
    Ultrasonics, Vol.40, pp.333-336, (2002)
  24. H. Ogi, G. Shimoike, M. Hirao, K. Takashima and Y. Higo
    Anisotropic Elastic-Stiffness Coefficients of an Amorphous Ni-P Film
    J. Appl. Phys., vol. 91, no.8, pp.4857-4862, (2002)
  25. H.MiuraandM.Matsuda
    "SuperHighStrengthMetalInjectionMoldedLowAlloySteelsbyIn-ProcessMicrostructuralControl"
    MaterialsTransaction,Vol.43 No.3,pp.343-347(2002.3)
  26. H.Miura
    "ANewPIMJoiningProcess"
    JounalofKoreanPowderMetallurgyInstitute,Vol.9, No.4,pp.203-210(2002.9)
  27. H.Miura
    "FatigueFractureBehaviorofPMandPIMSteels"
    Proc.of3rdInt.PowderMet.Conf. Ankara,Turkey(inprinting)(2002.9)
  28. M.UemuraandH.Miura
    "OptimizationofMoldingConditionsforThixomoldingofMagnesiumAlloy"
    JSME/ASMEInt.Conf.onMaterialsandProcessing2002,Vol.1 pp.120-123(2002.10)
  29. H.Miura,T.Yano,andM.Uemura
    "MIMIn-ProcessJoiningforMulti-functionality"
    JSME/ASMEInt.Conf.onMaterialsandProcessing2002,Vol.1 pp.124-129(2002.10)
  30. M.Otsu,M.Matsushima,K.OsakadaandH.Miura
    LaserFormingofThree-DimensionalShapedSheetMetalUsingTriangularPatches
    Proc.ofInt.Conf.onTechnologyofPlasticity,Vol.2 pp.1021-1026(2002.10)
  31. M.Shiomi,D.Takano,M.Otsu,K.Osakada
    "Formingofaluminiumalloyataroundsolidustemperature"
    Proc.7thInt.Conf.Tech.Plasticity,pp.1333-1138,(2002.10)
  32. K. Takashima, M. Shimojo, Y. Higo and M. V. Swain
    Fracture Behavior of Micro-Sized Specimens with Fatigue Pre-Crack Prepared from a Ni-P Amorphous Alloy Thin Film
    ASTM Standarad Technical Publication, vol.1413, pp.72-81, (2001)
  33. K. Takashima, M. Shimojo, Y. Higo and M. V. Swain
    Fatigue Crack Growth of a Ni-P Amorphous Alloy Thin Film
    ASTM Standard Technical Publication, vol.1413, pp.52-61, (2001)
  34. A. Ogura, R. Tarumi, M. Shimojo, K. Takashima and Y. Higo
    Control of Nanocrystalline Orientation Using the Application os a Stress Field in an Amorphous Alloy
    Applied Physics Letters, vol.79, no.7, pp.1042-1044, (2001)
  35. T. Inamura, S. Nagano, M. Shimojo, K. Takashima and Y. Higo
    Detection of Pre-Martensitic Transformation Phenomena in Austenitic Stainless Steels Using an Acoustic Emission Technique
    J. Acoustic Emission, vol.19, pp.85-90, (2001)
  36. H. Ogi, H. Ledbetter, K. Takashima, G. Shimoike and M. Hirao
    Elastic Properties of a Crossply SiCf/Ti Composite at Elevated Temperatures
    Metall. Mater. Trans., A., vol.32A, no.5, pp.425-429, (2001)
  37. M. Shimojo, T. Inamura, T. H. Myeong, K. Takashima and Y. Higo
    Formation of Nano-Sized Martensite Particles in Stainless Steels
    Metall. Mater. Trans., A., vol.32A, no.5, pp.261-265, (2001)
  38. K. Takashima, Y. Higo, S. Sugiura and M. Shimojo
    Fatigue Crack Growth Behavior of Micro-Sized Specimens Prepared from an Electroless Plated Ni-P Amorphous Alloy Thin Film
    Materials Transactions, vol.42, no.1, pp.68-73, (2001)
  39. H. Ogi, M. L. Dunn, K. Takashima and H. Ledbetter
    Elastic Properties of a Unidirectional SiCp/Ti Composite - Acoustic Resonance Measurements and Micromechanics predictions
    J. Appl. Phys., vol.87, no.6, pp.2769-2774, (2000)
  40. R. Tarumi, A. Ogura, M. Shimojo, K. Takashima and Y. Higo
    Molecular dynamics simulation of crystallization in an amorphous metal during shear deformation
    Jpn. J. Appl. Phys., vol.39, no.6B, pp.L611-L613, (2000)
  41. S. Maekawa, K. Takashima, M. Shimojo, Y. Higo, S. Sugiura, B. Pfister and M. V. Swain
    Fatigue Tests of Ni-P Amorphous Alloy Microcantilever Beams
    Jpn. J. Appy. Phys., vol.38, no.12B, pp.7194-7198, (1999)
  42. S.Ando, Y.Mine, K.Takashima, S.Itoh, H.Tonda
    Explosive compaction of Nd-Fe-B powder
    J. Mater. Processing Tech., vol.85, pp.142-147, (1999)
  43. H. Ogi, K. Takashima, H. Ledbetter, M. L. Dunn, G. Shioike, M. Hirao and P. Bowen
    Elastic Constants and Internal Friction of an SiC-Fiber-Reinforced Ti-Alloy-Matrix Crossply Composite: Measurement and Theory
    Acta Mater., vol.47, no.9, pp.2787-2796, (1999)
  44. Y. Mine, T. Yamada, S. Ando, K. Takashima, H. Tonda, Y. Higo
    Fatigue Crack Propagation in Titanium Single Crystals
    Key Engineering Materials, vol.145-149, pp.721-726, (1998)
  45. K. Takashima, K. M. Fox, C. Barney, J. G. Pursell and P. Bowen
    Characterisation of Acoustic Emission Signals During Fracture and Fatigue of SiC Fibre Reinforced Ti Alloy Composites
    Materials Science and Technology, vol.12, no.11, pp.917-922, (1996)
  46. K. Takashima, S. Ando, H. Tonda and P. Bowen
    Damage Evolution and Dynamic Mechanical Properties in a SiC Fibre Reinforced Ti Alloy Composite, Materials Transactions
    JIM, vol.37, no.3, pp.414-419, (1996)
  47. S. Ando, K. Takashima and H. Tonda
    Molecular Dynamics Simulation of (c+a) Edge Dislocation Core Structure in HCP Crystals
    Materials Transactions, JIM, vol.37, no.3, pp.319-322, (1996)
  48. H. Tonda, S. Ando, K. Takashima and T. Vreeland, Jr.
    Anormalous Temperature Dependence of the Yield Stress by {1122}<1123> Secondary Pyramidal Slip in Cadmium Crystals - II. Mechanisms
    Acta Metallurgica et Materialia, vol.42, no.8, pp.2853-2858, (1994)
  49. H. Tonda, S. Ando, K. Takashima and T. Vreeland, Jr.
    Anormalous Temperature Dependence of the Yield Stress by {1122}<1123> Secondary Pyramidal Slip in Cadmium Crystals - I. Experiments
    Acta Metallurgica et Materialia, vol.42, no.8, pp.2845-2851, (1994)
  50. Y. Fukui, K. Takashima and C. B. Ponton
    Measurement of Young's Modulus and Internal Friction of an In-Situ Al/Al3Ni Functionally Gradient Materials
    J. Materials Sci., vol.29, no.9, pp.2281-2288, (1994)
  51. K. Takashima, Y. Higo and S. Nunomura
    The Propagation Velocity of the Martensitic Transformation in 304 Stainless Steel
    Philosophical Magazine, vol. A29, no.2, pp.231-241, (1984)
  52. K. Takashima, Y. Higo and S. Nunomura
    Determination of the Duration of Transient Phenomena by Frequency-Domain Analysis of Acoustic Emission
    Philosophical Magazine, vol. A29, no.2, pp.221-229, (1984)
  53. K. Takashima, Y. Higo and S. Nunomura
    Identification of Acoustic Emission During the Martensite Transformation of 304 Stainless Steel
    Scripta Met., vol.14, no.5, pp. 489-491, (1980)
  54. H.Miura
    "PIMIn-ProcessJoiningforMoreComplicatedShapeandFunctionality"
    2002WorldCongressonPowderMet.&ParticulateMat., Orland,U.S.A.,(inprinting)(2002.6)
  55. H.Miura
    "FatigueFractureBehaviorofPMandPIMSteels"
    3rdInt.PowderMet.Conf., Ankara,Turkey(inprinting)(2002.9)
  56. M.UemuraandH.Miura
    "OptimizationofMoldingConditionsforThixomoldingofMagnesiumAlloy"
    JSME/ASMEInt.Conf.onMaterialsandProcessing2002,Vol.1 pp.120-123(2002.10)
  57. H.Miura,T.Yano,andM.Uemura
    "MIMIn-ProcessJoiningforMulti-functionality"
    JSME/ASMEInt.Conf.onMaterialsandProcessing2002,Vol.1 pp.124-129(2002.10)
  58. M.Otsu,H.Miura,M.Matsushima,K.Osakada
    NAMRI/SMEOutstandingPaperAwardFinalists
    Three-DimensionalLaserFormingofSheetMetalUsingTriangularPatches.

pagetop