熊本大学 大学院先端科学研究部 物質材料生命工学部門 松田光弘研究室(旧 微細構造解析学研究室:Microstructure Analysis of Materials Research Group)

研究業績

学術雑誌論文(国際会議論文を除く。)

  • Koki Onaka, Kyosuke Hirayama, Mitsuhiro Matsuda:" Self-Accommodation and Deformation Microstructure of Martensite in Ti30Ni50Zr20 Alloy", Materials Transactions, Vol. 65 (2024) 268-273.
  • Mitsuhiro Matsuda, Yuta Himeno, Kenji Shida, Motohide Matsuda, Masatoshi Mitsuhara, Yasushi Nakajima:"Periodic oxygen-defective ZrO2-x films with room-temperatureferromagnetism produced by precisely controlling oxidation of metallic Zr foil", Scripta Materialia, Vol. 242 (2024) 115944.
  • M. Matsuda, N. Maeda, K. Onaka, H. Akamine, M. Nishida:"Effect of Hf on the lattice invariant shear and self-accommodation of martensite in Ti-Ni-Hf alloys",Journal of Materials Science, Vol. 58 (2023), 10896-10910.
  • K. Onaka, T. Yoshioka, M. Matsuda: "Microstructural characteristics and self-accommodation of the martensite in equiatomic ZrPd and near-equiatomic NiZr alloys", Journal of Materials Science, Vol. 58 (2023), 1951-1965.
  • M. Kerber, T. Waitz, M. Matsuda: "Structural changes of TiPt high-temperature shape memory alloys induced by high pressure torsion", Journal of Alloys and Compounds, Vol. 935 (2023) 168037.
  • Miho Nagata, Mitsuhiro Matsuda, Yuta Himeno, Kenji Shida, Motohide Matsuda: "Magneli phase vanadium oxide thin films produced by stepwise oxidation of vanadium metal foil", Scripta Materialia, Vol. 219 (2022) 114884.
  • M. Matsuda, K. Kiwaki, H. Akamine, M. Nishida: "Effect of Hf on the microstructure and martensitic transformation behavior in Ti-Pd-Hf alloy", Journal of Alloys and Compounds, Vol. 917 (2022) 165491.
  • Yuta Himeno, Mitsuhiro Matsuda, Kenji Shida, Motohide Matsuda: " Color variations based on strong-interference effects in oxygen-defective tetragonal ZrO2-x films in nanometer thickness produced by oxidation of zirconium metal foil", Scripta Materialia, Vol. 203 (2021), 114101.
  • 特願2021-089512 積層体及びその製造方法(チタン)
  • Mitsuhiro Matsuda, Yuta Yamada, Yuta Himeno, Kenji Shida, Motohide Matsuda: "Magneli Ti4O7 thin film produced by stepwise oxidation of titanium metal foil", Scripta Materialia, Vol. 198 (2021), 113829.
  • 特願2021-089514 積層体及びその製造方法(バナジウム)
  • Mitsuhiro Matsuda, Yosuke Shuto, Yuta Himeno, Kenji Shida, Motohide Matsuda: "Black Ti-Zr-based oxygen defective oxide film with visible light absorption prepared via atmospheric oxidation", Journal of Materials Research, Vol. 36 (2021), 368-375.
  • M. Matsuda, K. Arai, M. Mitsuhara, Y. Yamabe-Mitarai, M. Nishida: "Self-accommodation and morphological characteristics of the B33 martensite in Zr-Co-Pd alloys", Journal of Materials Science, Vol. 56 (2021), 5899-5909.
  • Yuta. Himeno, Mitsuhiro Matsuda, Kenji Shida, Motohide Matsuda: "Dopant-free transparent ZrO2 with monoclinic structure produced by oxidation process using Zr metal", Scripta Materialia, Vol. 187 (2020)103-106.
  • 特願2020-086904 透明成形体及びその製造方法
  • Shota Hisada, Mitsuhiro Matsuda and Yoko Yamabe-Mitarai: “Shape Change and Crystal Orientation of B19 Martensite in Equiatomic TiPd Alloy by Isobaric Test”, Metals, Vol. 10 (2020), No.375.
  • M. Matsuda, Y. Himeno, K. Shida, M. Matsuda: “Microstructural characterization of black-monoclinic oxygen defective HfO2-x film formed on metal Hf plate in air”, Ceramics Inter. Vol. 46 (2020), 6796-6800.
  • M. Matsuda, R. Matsuoka, M. Mitsuhara, M. Nishida: "Microstructural Characterization of Martensite with Long Period Stacking Order Structure in Hf-Co-Pd Alloy" Mater. Trans., Vol. 61 (2020), 27-32.
  • S. Hisada, M. Matsuda, M. Nishida, C. A. Biffi, A. Tuissi: "Microstructure and Martensitic Transformation Behavior in Thermal Cycled Equiatomic CuZr Shape Memory Alloy", Metals, Vol. 9 (2019), No.580.
  • 松田光弘,光原昌寿,西田稔:"Zr-Co基合金マルテンサイト相における長周期積層構造", まてりあ,Vol.58 (2019), 90.
  • 久田翔太,松田光弘:"CTEM傾斜実験による等原子比HfPd合金の結晶構造解析", まてりあ,Vol.57 (2018), 605.
  • M. Matsuda, Y. Shinagawa, K. Takashima, M. Mitsuhara, M. Nishida: "Characterization of antiphase boundary-like structure of B33 martensite in Zr-Co-Pd alloy", Mater. Trans., Vol. 59 (2018), 1567-1573.
  • M. Matsuda, T. Nishiura, T. Yamamuro, M. Nishida: "Phase diagram of near equiatomic Zr-Pd Alloy", Metals, Vol. 8 (2018), No.366.
  • M. Matsuda, Y. Himeno, K. Shida, M. Matsuda: “Black-ZrO2 thin film produced by oxidation of Zr metal plate in air”, Mater. Lett., Vol. 230 (2018), 117-119.
  • 特願2018-036640 第4族元素酸化物からなる導電性成形体,それを含む傾斜材料,及びその製造方法.
  • S. Hisada, M. Matsuda, K. Takashima, Y. Yamabe-Mitarai: “Structural analysis and martensitic transformation in equiatomic HfPd alloy”, J. Solid State Chem., Vol. 258 (2018), 712-717.
  • S. Tulic, M. Kerber, M. Matsuda, T. Waitz: “Phase transformations of severely plastically deformed Ti-Ni-Pd high-temperature shape memory alloys”, Functional Mater. Lett., Vol. 10 (2017), 1740012.
  • M. Matsuda, R. Sago, K. Akamine, S. Tsurekawa, K. Takashima, M. Nishida: “Enhancement of ductility in Fe-Co based alloys by substitution of Pd”, J. Alloys Comps., Vol. 682 (2016), 124-131.
  • M. Matsuda, M. Mitsuhara, K. Takashima, M. Nishida: “Antiphase Boundary-Like Structure of B19 Martensite in Ti-Ni-Pd Shape Memory Alloy”, Mater. Trans., Vol. 57 (2016), 250-256.
  • M. Matsuda, S. Nishimura, S. Tsurekawa, K. Takashima, M. Mitsuhara, M. Nishida: “Crystallography and Morphology of Antiphase Boundary-like Structure Induced by Martensitic Transformation in Ti-Pd-Fe Alloy”, J. Alloys Comps., Vol. 618 (2015), 527-532.
  • M. Matsuda, F. Tanaka, S. Tsurekawa, K. Takashima, M. Mitsuhara, M. Nishida: “Novel Long-Period Stacking-Ordered Structure of Martensite in Zirconium-Palladium Alloys”, Philos. Mag. Lett., Vol. 95 (2015), 21-29.
  • M. Matsuda, K. Yamashita, S. Tsurekawa, K. Takashima, M. Nishida: “Ductility Enhancement in Co-Fe-Ni Alloys by Microstructural Control”, Intermetallics, Vol. 52 (2014) 124-130.
  • M. Matsuda, R. Yamashita, S. Tsurekawa, K. Takashima, M. Mitsuhara, M. Nishida: “Antiphase Boundary-Like Structure of B19’ Martensite via R-Phase Transformation in Ti-Ni-Fe alloy”, J. Alloys Comps., Vol. 586 (2014), 87-93.
  • Y. Mine, H. Takashima, M. Matsuda, K. Takashima: “Microtension Behaviour of Lenticular Martensite Structure of Fe-30mass% Ni Alloy”, Mater. Sci. Eng. A, Vol. 618, (2014), 359-367.
  • M. Otsu, M. Yasunaga, M. Matsuda, K. Takashima: “Friction Stir Incremental Forming of A2017 Aluminum Sheets”, Procedia Eng., Vol. 81, (2014), 2318-2323.
  • M. Matsuda, Y. Iwamoto, Y. Morizono, S. Tsurekawa, K. Takashima, M. Nishida: “Enhancement of Ductility in B2-Type Zr-Co-Ni Alloys with Deformation-Induced Martensite and Microcrack Formation”, Intermetallics, Vol. 36 (2013), 45-50.
  • Y. Mine, H. Yoshimura, M. Matsuda, K. Takashima, Y. Kawamura: “Microfracture Behavior of Extruded Mg-Zn-Y Alloys Containing Long-Period Stacking Ordered Structure at Room and Elevated Temperatures”, Mater. Sci. Eng. A, Vol. 570, (2013), 63-69.
  • Y. Mine, K. Hirashita, H. Takashima, M. Matsuda, K. Takashima: “Micro-Tension Behaviour of Lath Martensite Structures of Carbon Steel”, Mater. Sci. Eng. A, Vol. 560, (2013), 535-544.
  • M. Matsuda, K. Yamashita, R. Sago, K. Akamine, K. Takashima, M. Nishida: “Development of Ductile B2-Type Fe-Co Based Alloys”, Mater. Trans., Vol. 53 (2012), 1826-1828.
  •  

  • M. Matsuda, Y. Yasumoto, K. Hashimoto, T. Hara, M. Nishida: “Transmission Electron Microscopy of Twins in 10M Martensite in Ni-Mn-Ga Ferromagnetic Shape Memory Alloy”, Mater. Trans., Vol. 53 (2012), 902-906.
  • S. Ii, M. Matsuda, T. Matsui, T. Fujimoto, A. Kakisaka, T. Kikutake, S. Tsurekawa, K. Ikeda, M. Nishida: “Controlling Grain Boundary Character Distribution of High-Temperature B2 Phase in Ti-Ni-Fe Alloy”, Intermetallics, Vol. 31, (2012), 65-71.
  • Y. Shimada, Y. Kayamori, S. Nishida, M. Matsuda, K. Takashima: “Micromechanical Characterization of Microstructure in Weld Heat Affected Zone of Structural Steel”, Key Eng. Mater., Vol. 525-526, (2012), 585-588.
  • M. Otsu, H. Arai, M. Matsuda, K. Takashima: “Friction Stir Incremental Forming of Titanium Sheets”, Steel Research Inter., SPL, (2012), 419-422.
  • M. Matsuda, S. Yano, M. Nishida: “Morphology and Crystallography of Martensite Plate with Long Period Stacking Structure in Ti-Pd Shape Memory Alloy”, Mater. Trans. Vol. 52, (2011) 2016-2021.
  • M. Matsuda, T. Nishimoto, Y. Morizono, S. Tsurekawa, M. Nishida: “Enhancement of Ductility in B2-type Zr-Co-Pd Alloys with Martensitic Transformation”, Intermetallics Vol. 19, (2011) 894-899.
  • M. Matsuda, T. Nishimoto, K. Matsunaga, Y. Morizono, S. Tsurekawa, M. Nishida: “Deformation Structure in Ductile B2-Type Zr-Co-Ni Alloys with Martensitic Transformation”, J. Mater. Sci. Vol. 46, (2011) 4221-4227.
  • M. Matsuda, K. Kuramoto, Y. Morizono, S. Tsurekawa, E. Okunishi, T. Hara, M. Nishida, “Transmission Electron Microscopy of Antiphase Boundary-Like Structure of B19’ Martensite in Ti-Ni Shape Memory Alloy”, Acta. Mater. Vol. 59, (2011) 133-140.
  • 大津雅亮, 松尾浩紀, 松田光弘, 高島和希: “摩擦攪拌インクリメンタルフォーミング法によるA5052板の成形-摩擦攪拌インクリメンタルフォーミング法の開発-第3報”, 塑性と加工(日本塑性加工学会誌), 第52巻, (2011), 710-714.
  • 大津雅亮, 市川司, 松田光弘, 高島和希: “摩擦攪拌インクリメンタルフォーミング法によるAZ系マグネシウム合金板の成形性と加工部の機械的特性-摩擦攪拌インクリメンタルフォーミング法の開発-第2報”, 塑性と加工(日本塑性加工学会誌), 第52巻, (2011), 705-709.
  • 大津雅亮, 市川司, 松田光弘, 高島和希: “摩擦攪拌インクリメンタルフォーミング法の開発”,塑性と加工(日本塑性加工学会誌), 第52巻, (2011), 490-494.
  • M. Otsu, Y. Ide, M. Matsuda, K. Takashima: “Effect of Forming Conditions on Crystallization in Laser Forming of Palladium Based Thin Film Metallic Glass”, J. Solid Mechanics Mater. Eng., Vol. 5, (2011), 929-937.
  • Y. Mine, K. Hirashita, M. Matsuda, M. Otsu, K. Takashima: “Effect of Hydrogen on Tensile Behaviour of Micrometre-Sized Specimen Fabricated from a Metastable Austenitic Stainless Steel”, Corros. Sci., Vol. 53, (2011), 529-533.
  • Y. Mine, H. Fujisaki, M. Matsuda, M. Takeyama, K. Takashima: “Micro-Tension Behaviour of TiAl Polysynthetically-Twinned Crystals with 0°- and 90°-Oriented Lamellae”, Scr. Mater., Vol. 65, (2011), 707-710.
  • Y. Mine, K. Hirashita, M. Matsuda, K. Takashima: “Martensite Formation in Hydrogen-Containing Metastable Austenitic Stainless Steel during Micro-Tension Testing”, Metall. Mater. Trans. A., Vol. 42, (2011), 3567-3571.
  • K. Ishikawa, Y. Seki, K. Kita, M. Matsuda, M. Nishida, K. Aoki: “Hydrogen Permeation in Rapidly Quenched Amorphous and Crystallized Nb20Ti40Ni40 Alloy Ribbons”, Int. J. Hydrogen Energy, Vol. 36, (2011), 1784-1792.
  • Y. Morizono, T. Fukuyama, M. Matsuda, S. Tsurekawa: “Solid- and Liquid-Solid Reactions in Aluminum-Coated Titanium Substrate Fabricated by Using Explosive Energy”, Mater. Trans., Vol. 52, (2011), 2178-2183.
  • M. Matsuda, K. Hayashi, M. Nishida, “Microstructure and Mechanical Properties of Zr-Co-Ni Intermetallic Compound”, Mater. Sci. Forum Vols. 638-642, (2010) 1379-1383.
  • M. Otsu, H. Matsuo, M. Matsuda, K. Takashima: “Friction Stir Incremental Forming of Aluminum Alloy Sheets”, Steel Res. Int. Vol. 81, (2010) 942-945.
  • M. Matsuda, K. Hayashi, M. Nishida: “Ductility Enhancement in B2-Type Zr-Co-Ni Alloys with Martensitic Transformation”, Mater. Trans. Vol. 50, (2009) 2335-2340.
  • M. Matsuda, Y. Shimada, T. Murasaki, M. Nishida, K. Ishikawa, K. Aoki: “Crystallization and Microstructure Changes in Rapidly Solidified Nb20Ti40Ni40 Hydrogen Permeation Alloy”, J. Alloys Comps. Vol. 485, (2009) 773-777.
  • M. Machida, K. Murakami, S. Hinokuma, K. Uemura, K. Ikeue, M. Matsuda, M. Chai, Y. Nakahara,T. Sato: “AlPO4 as a Support Capable of Minimizing Threshold Loading of Rh Automotive Catalysts”, Chem. Mater. Vol. 21, (2009) 1796-1798.
  • H. M. Ghasemi, M. Emamy, H. Eskandari, K. Hokamoto, M. Nishida, M. Matsuda: “Interfacial Characterization in Al-20vol.-%SiCp Explosively Compacted Composite”, Mater. Sci. Technol. Vol. 25, (2009) 108-110.
  • M. Matsuda, T. Murasaki, M. Nishida, K. Ishikawa, K. Aoki: “Electron Microscopy Study of Eutectic Structure in Nb-Ti-X and Nb-Zr-X (X = Co, Ni) Hydrogen Permeation Alloys”, Mater. Trans. Vol. 49, (2008) 2208-2213.
  • M. Matsuda, T. Hara, M. Nishida: “Crystallography and Morphology of Antiphase Boundary-Like Structure Induced by Martensitic Transformation in Ti-Pd Shape Memory Alloy”, Mater. Trans. Vol. 49, (2008) 461-465.
  • M. Nishida, M. Matsuda, Y. Yasumoto, S. Yano, Y. Yamabe-Mitarai, T. Hara, “Crystallography and Morphology of Twins in Equiatomic TiPt Martensite”, Mater. Sci. Technol. Vol. 24, (2008) 884-889.
  • M. Nishida, T. Hara, M. Matsuda, S. Ii: “Crystallography and Morphology of Various Interface in Ti-Ni, Ti-Pd and Ni-Mn-Ga Shape Memory Alloys”, Mater. Sci. Eng. A, Vol. 481-482, (2008) 18-27.
  • 島田裕介, 松田光弘, 川上雄士, 大津雅亮, 高島和希, 西田 稔, 石川和宏, 青木 清: “液体急冷で作製したNb-TiNi水素透過合金膜のマイクロ破壊試験”, 日本金属学会誌, 第72巻, (2008) 1015-1020.
  • Sh. Khameneh Asl, M. Heydarzadeh Sohi, K. Hokamoto, M. Matsuda, R. Tomoshige, M. Nishida: “Study of Phase Transformation in Heat Treatment of HVOF Thermally Aprayed WC-17Co Coating”, Mater. Sci. Forum Vol. 566, (2008) 161-166.
  • M. Matsuda, T. Hara, E. Okunishi, M. Nishida: “High-angle Annular Dark Field Scanning Transmission Electron Microscopy of the Antiphase Boundary in a Rapidly Solidified B2 Type TiPd Compound”, Philos. Mag. Lett., Vol. 87, (2007) 59-64.
  • E. Omurzak, J. Jasnakunov, N. Mairykova, A. Abdykerimova, A. Maatkasymova, S. Sulaimankulova, M. Matsuda, M. Nishida, H. Ihara, T. Mashimo: “Synthesis Method of Nanomaterials by Pulsed Plasma in Liquid”, J. Nanosci. Technol. Vol. 7, (2007) 3157-3159.
  • M. Matsuda, D. Hashimoto, V. C. Solomon, M. Nishida: “Morphology and Crystallography of Ti2Pd Phase Precipitated in B2 Parent and B19 Martensite Matrices in Ti-Rich Ti-Pd Alloys”, Mater. Sci. Eng. A, Vol. 438, (2006) 821-824.
  • M. Nishida, M. Matsuda, T. Fujimoto, K. Tanaka, A. Kakisaka, H. Nakashima: “Crystallography of Deformation Twin Boundaries in a B2 Type Ti-Ni Alloy”, Mater. Sci. Eng. A, Vol. 438-440, (2006) 495-499.
  • M. Matsuda, S. Ando, M. Nishida: “Dislocation Structure in Rapidly Solidified Mg97Zn1Y2 Alloy with Long Period Stacking Order Phase”, Mater. Trans., Vol. 46, (2005) 361-364.
  • M. Matsuda, S. Ii, Y. Kawamura, Y. Ikuhara, M. Nishida: “Variation of Long-Period Stacking Order Structures in Rapidly Solidified Mg97Zn1Y2 alloy”, Mater. Sci. Eng. A, Vol. 393, (2005) 269-274.
  • M. Matsuda, S. Ii, Y. Kawamura, Y. Ikuhara, M. Nishida: “Interaction between Long Period Stacking Order Phase and Deformation Twin in Rapidly Solidified Mg97Zn1Y2 Alloy”, Mater. Sci. Eng. A Vol. 386, (2004) 447-452.
  • M. Matsuda, Y. Kawamura, M. Nishida: “Production of High Strength Mg97Zn1Y2 Alloy by Using Mechanically Alloyed MgH2 Powder”, Mater. Trans. Vol. 44, (2003) 440-444.
  • M. Matsuda, S. Yoshimoto, Y. Kawamura, K. Ishikawa, M. Nishida: “Development of High Strength Mg Alloys by MA-HDH P/M Process”, Mater. Sci. Forum, Vols. 419-422, (2003) 739-744.
  • M. Matsuda, H. Miura: “Mechanical Properties of Injection Molded Fe-6%Ni-0.4%C Steels with Varying Mo Contents of 0.5 to 2%”, Metals and Mater. Int., Vol. 9, (2003) 537-542.
  • S. Yoshimoto, M. Matsuda, M. Yamasaki, Y. Kawamura: “Development of High Strength Mg Alloys by Mechanical Alloying”, Mater. Sci. Forum Vol. 419-422, (2003) 763-768.
  • H. Miura, M. Matsuda: “Superhigh Strength Metal Injection Molded Low Alloy Steels by In-process Microstructural Control”, Mater. Trans. Vol. 43, (2002) 343-347.
  • 三浦秀士, 松田光弘: “ヘテロ組織インプロセス制御による高機能動力伝達部品のネット成形”ふぇらむ, 第7巻, (2002) 35-38.
  • 三浦秀士,中川卓洋,松田光弘: “MIMプロセスによるW-Cu系放熱部材の開発”, 粉体および粉末冶金, 第49巻, (2002) 531-533.
  • M. Matsuda, H. Miura: “High Performance Fe-Mn Sintered Low Alloy Steels by MIM Process”, P/M Sci. & Technol. Briefs, Vol. 3, (2001) 5-8.
  • 松田光弘,三浦秀士: “焼結低合金鋼の高性能化に向けたメゾへテロ組織制御(第2報)”, 粉体および粉末冶金, 第48巻, (2001) 451-455.
  • 三浦秀士,矢野健文,松田光弘: “薄肉・中空品のMIMインプロセス接合”, 粉体および粉末冶金, 第48巻, (2001) 1097-1101.
  • 三浦秀士,谷口 玲,松田光弘: “高密度化と組織制御による焼結低合金鋼の高性能化”, 粉体および粉末冶金, 第48巻, (2001) 456-460.
  • 松田光弘,三浦秀士: “焼結低合金鋼の高性能化に向けたメゾへテロ組織制御”, 粉体および粉末冶金, 第47巻, (2000) 681-685.
PAGE TOP